Pellet Stove Furnace
Pellet stoves are available as freestanding units or fireplace inserts that can give your home the appearance of an authentic fireplace that burns wood. They can be purchased as freestanding units or fireplace inserts that can give your home the appearance of an old-fashioned wood-burning fireplace.
The auger moves the pellets from the hopper to the combustion chamber in the combustion chamber, where they are burned and produce heat. Sensors detect the flame and adjust the rate of operation to maintain a desired temperature in the room.
1. Energy Efficiency
Pellet stoves burn a renewable non-toxic fuel composed of compressed sawdust wood chips, bark and other materials that are typically put in landfills, but can be used to create a sustainable and clean source of heating. They aid homeowners in reducing their energy consumption and reduce greenhouse gas emissions. Many homeowners who own pellet stoves have reported that they've recouped their initial investment within just a few years, thanks to lower heating costs.
Pellets are highly compressed and more dense than natural wood, which makes them more efficient to burn. They also produce less creosote than traditional fireplaces that burn wood. They are also packaged in plastic bags that seal out moisture and require less frequent cleaning.
Similar to other heating systems, pellet stoves should be properly size and vented. A trained technician can assess your venting requirements and space requirements in order to get the most efficient results.
When the hearth is installed, it is constructed to fit the space and the vent is inserted through a pre-cut hole your home's siding. The vent may be installed through a sidewall or roof depending on your preference and the local laws.
Once the hearth and vent are finished the pellet stove can be plugged in. Certain manufacturers offer the option of a remote control to make it simple to begin and maintain the fire, while others offer additional sensors that monitor airflow and combustion as well as flue temperatures and pressure. If the system determines that it needs more pellets or less, it signals to the auger that it should accelerate or slow down accordingly.
Every stove has a hopper for storage that holds from 35 to 130 pounds of pellets until needed. Hopper capacities determine the frequency at which the stove has to be refilled and larger hoppers allow longer intervals between refills. A grille draws air out of the room, passes it over the heat exchanger and blows heated air into the living area through convection. A grate or auger distributes the pellets, and an under-sink pan will collect any unburnt ones as well as the ashes of combustion.
While pellet stoves are more efficient than wood-burning models they're not as efficient as natural gas furnaces or electric heaters. Electric components that drive motorized parts of stoves require electricity. This could be an issue in the event of a power failure, although backup systems like batteries and generators are available.
2. Low Maintenance
Pellet stoves can be extremely efficient, but they require some maintenance in order to operate properly. Cleaning your stove and exhaust vent on a regular basis will stop the accumulation of dangerous creosote that could lead to a fire or an explosion that could cause damage to your stove or even your home.
A pellet stove burns natural wood pellets or other materials (like corn kernels, nutshells or small pieces of scrap wood). An electric-powered auger will feed the pellets from a fuel container into the burner and into the combustion chamber. The thermostat you set regulates the rate at which pellets are delivered to the burner. The fire can be kept roaring or decreased or even extinguished in accordance with the temperature you set. The ash will be disposed in an empty ash tin underneath the burner. It can be easily removed and then disposed.
Pellets are created from the byproducts from lumber processing that would otherwise be thrown away. They are a renewable resource and produce less particles than traditional wood-burning appliances, making them a cleaner burning heat source. The amount of carbon monoxide, carcinogens, and other harmful chemicals that are released from pellet stoves is less than the latest EPA certified wood stoves.
Due to the low emission the stoves are not required to be vented through chimneys as traditional wood stoves, but should be properly vented through a wall or another exterior structure. Pellet stoves are equipped with flue ports that are located on the top or rear of the appliance. They are connected to a ventpipe that extends outside the home.
A pellet stove has one drawback: you have to purchase or store enough fuel pellets to last the entire winter season. Pellet stove owners typically use three tons of wood pellets every winter, which is a cost of $200 per ton. The costs can add up however they website are much less expensive than buying firewood and hauling it for the wood-burning fireplace or stove. You should buy enough pellets to ensure your stove will be able to run through the coldest winter months. Additionally, you will require a location to keep the pellets (preferably dry and cool).
3. Reduce Carbon Footprint
Pellet stoves use renewable biomass fuels to generate heat, which reduces the need for fossil fuels that are depleted. This reduces carbon footprints as well as diversifying energy sources for homes.
Emissions from pellet stoves are considerably lower than woodstoves, even newer EPA-certified ones. The emissions of pellet stoves are also significantly lower than those from gas furnaces. Pellets are made up of compressed sawdust, bark, and other lumber leftovers and can also be composed of a variety of other materials including corn, soybeans, nutshells, cherry pits, and agricultural waste. When they are burned, they release less particulates (leading to respiratory problems and allergies) carcinogens, carbon monoxide and nitrogen oxides.
The major difference between the wood stove and the pellet stove is the feed system. Pellet stoves have hoppers that hold the pellets. When the thermostat or sensors suggest that the room needs heating, the auger is turned and the pellets are fed into the combustion chamber, where they burn and generate heat. The combustion chamber moves through a heat exchanger, which transfers the heat to the blower before releasing it into the room. This process results in very low emissions and no creosote accumulation.
After the hopper has been empty, a cyclone process takes away the ash and puts it in an ash jar. The stove also contains a fan to circulate the warm, clean air throughout the living area. The majority of pellet stoves require little maintenance and have a large viewing space for you and your family members to relax and enjoy the flames.
The quality of pellets is the most important factor that influences the emissions of pellet stoves. The poor quality pellets will result in more emissions. When choosing your pellets ensure that they're certified to meet certain standards and don't contain other ingredients like petroleum products or urea. Choose a company that has a guarantee and will replace or repair parts in the event of an issue. If you're looking for an even greener approach certain states allow homeowners to claim a tax credit for installing pellet stoves. This is a great opportunity to to offset the initial cost of this type of stove and make it more affordable to install.
4. Reduced Noise
Pellet stoves emit very little emissions or smoke compared to wood-burning fireplaces. They also utilize an electric fan to distribute heat more evenly across the room. This is the reason pellet stoves need less maintenance than wood stoves. While wood stoves require regular cleaning of chemicals and particulates to prevent deterioration, pellet stoves can be cleaned by an electric vacuum cleaner.
Many manufacturers have made a conscious effort to design their stoves to be simple to set up, operate and maintain. They also offer their stoves with a variety of styles that can be matched to your home's decor. Some come with programmable thermostats and remote control as well as a WIFI apps that let you control and monitor your stove from any location in the world.
The majority of pellet stoves have a large fuel hopper that can accommodate between 35 and 130 pounds of pellets. The pellets are then pumped into the combustion chamber by an auger. The heat output and how hot the fire gets depends on the speed at which the pellets are fed to the burner. The hopper can be filled with hardwood pellets (from dense wood species such as oak and hickory) or softwood pellets (from pine and fir). A lot of stoves can burn biomass pellets made from switchgrass and corn. This is a green alternative.
Since pellet stoves burn as a clean fuel, they produce far less smoke than conventional wood-burning fireplaces and require fewer maintenance. They do not need chimneys and are a better choice for retrofits or new construction.
Pellet stoves do not require regular cleaning of creosote or other chemical similar to wood stoves. They only need periodic inspections to ensure the proper operation and maintenance. This could involve regular cleaning and inspection of the ash or "clinker" as well as the motors and fans, depending on the model. Your appliance dealer will be able to provide the proper procedures for your particular brand and model. He can also provide you with information regarding safety and storage, and assist you in finding the appropriate fuel for your stove.